The evolution of the brain

This article is written with permission of Dr. Nicolas Gerber (my boss during my civil service).

When I first got into this project I couldn’t believe that no one has ever built a brain with silicone, apparently there was no need for it. There was absolutely zero information in the net about building a highly detailed brain. I’ve seen an article here and there about someone who made a 3D print of his own brain but all of them were rather useless for our purposes. They – Stefan Weber,  the head of the ARTORG Research Center and Andreas Raabe, the director of the institute of neurosurgery from the Insel hospital wanted me to build an easily reproducible and “low-cost” (for medical purposes) silicone brain in order to have a means of training for students and inexperienced neurosurgeons.Honestly I felt a little thrown in the water when I got this assignment since I have no medical background and I have never worked with medical images or silicone before. Luckily I am willing to learn anything and we got an awesome 3D printer (Objet Eden 260VS) of which I am responsible so I can basically print whatever I want. The first problem I ran into was getting a

High resolution 3D model

First I tried to get a ready to print stl file of a brain. I found several models that were o.k. for prints and for learning the process of casting silicone.

Eventually I decided to create my own 3D model. The hardest but also the most important part of creating a detailed model is getting good raw data. Usually to segment a brain you would need a T1-weighted MRI scan, preferably at 7 Tesla. As a part of a different project, all members of my group got a 3T MRI scan of their brains so I had a lot of raw data.

I tinkered a lot with open source tools but couldn’t really get good results. I tried freesurfer, InVesalius and modeled with Meshmixer and Meshlab. In my opinion freesurfer is crap since it works only on Linux and takes ages (easily 12-24h) to get a model out of it. InVesalius is quite a nice software but since I got hold of a Amira license there was no need for it anymore.

After segmenting my own brain the resolution turned out to be still too low for a highly detailed model. ARGHH! Long story short I found this site: BIG BRAIN PROJECT They provide highly detailed raw data of a brain from a 65-year-old man. An hour or so later I had the brain segmented. Now with a high res model the journey to the silicone brain could continue. The high-resolution is going to turn out a blessing but also a curse.

brs

brs2

3D Printing and silicone casting

There is a lot that can go wrong during the casting process. The following points may only apply to soft and complex models. Here’s what I learned:

  • It is not possible to use a flexible silicone mold for complex models. Even with release agent the different silicones will stick quite well to each other which will end up in a destroyed mold.
  • The silicone must be a platinum curing type, don’t use tin curing silicone.
  • The physical properties are extremely important
    • The shore A hardness has to be equal or lower than 00-30
    • Elongation at break must be at least 500% otherwise it’s not possible to demold without tearing the model apart.
    • Mixed viscosity must be lower than 5000 mPas
    • Pot life should be at least 30mins
  • Even if you dilute your silicone with 50% silicone oil in order to get a softer model, the silicone will cure but the physical properties will suffer. You can use this as a cheap alternative for the expensive low shore hardness silicone.
  • Working with silicone is very messy
  • If you spill already mixed silicone compound, don’t clean it up. Let it cure and clean up afterwards.

Here you can see the whole project from the beginning to the final product.

image1109

Once I had the final brain I created four mold parts in meshmixer. That took me nearly two days because meshmixer kept crashing every couple minutes.I am not sure why it always crashed but it might be because of invalid vertices or the high polygon count. Nevertheless I eventually managed to model the mold parts and get them printed and cleaned. Of course I started with smaller molds…

This slideshow requires JavaScript.

In the next few pictures you can see the casting and demolding process. Especially demolding the brain is a pain in the ass because the super soft silicone sticks very well to the mold. That wasn’t a problem with the green silicone but i guess I have to live with that. The detailed brain with its huge undercuts didn’t help either. The hardest part is getting the first quarter mold off, after that it gets easier. Still the demolding process needs a lot of patience (which sometimes isn’t one of my strengths…) The final brain is very squishy and nearly every person was disgusted after touching it. Haha.

This slideshow requires JavaScript.

Here is the final brain. Done. But the project still continues…

This slideshow requires JavaScript.

Now the brain has to fit in the skull. Then a surgeon will perform a craniotomy on the plastic skull which is sitting in a mayfield clamp in order to gain access to the intracranial aneurysm placed inside the silicone brain. The surgeons/students can then perform the clipping of the aneurysm. In the end there will be several skulls with different craniotomies and different aneurysms inside. There will be a pulsating flow of liquid to mimic the heartbeat using a peristaltic pump.  (Sidenote: The aneurysm shown below is not the correct one for this surgery)

image111

This slideshow requires JavaScript.